Thermal Engineering: Basic and Applied (English)

   Thursday, April 11, 2024   

Starting a new Lecture Notes Series on Thermal Engineering: Basic and Applied

Youtube Lecture Playlist Credits 

Channel Name: NPTEL IIT Guwahati

So Let Us Start to This Journey of Learning 

Thermal Engineering: Basic and Applied By Lecture Notes together!

Lecture 1: Thermal Engineering: Basic and Applied

Lecture 2: Lec 1: First law of Thermodynamics for control mass and control volume systems

Lecture 3: Lec 2: First law of Thermodynamics for control volume system (Flow system)

Lecture 4: Lec 3: Steady State Steady Flow Processes, combination of First and Second Laws

Lecture 5: Lec 4: Second Law of Thermodynamics: A Brief Review

Lecture 6: Lec 5: Combined First and Second Laws Applied to Processes

Lecture 7: Lec 6: Combined First and Second Laws: Flow and Non-Flow Processes

Lecture 8: Lec 7: Description of Steam Power Plant: Application of 1st and 2nd Laws to Different Processes

Lecture 9: Lec 8: Second Law Applied to Processes of Power Plant and Ideal Cycle of Power Plant

Lecture 10: Lec 9: Steam Power Plant: Thermodynamic aspects, Efficiency, Work ratio and Ideal Cycle

Lecture 11: Lec 10: Ideal Power Cycle and its Limitations, Introduction to Actual Power Cycle

Lecture 12: Lec 11: Limitations of Carnot Cycle, Simple Rankine Cycle and Analysis

Lecture 13: Lec 13: Reheat Cycle and Analysis

Lecture 14: Lec 12: Analysis of Simple Rankine Cycle and its Design Modifications

Lecture 15: Lec 14: Reheat Cycle and Analysis - Cont.

Lecture 16: Lec 15: Regenerative Principle of Steam Power Cycles

Lecture 17: Lec 16: Analysis of Regenerative Steam Power Cycles

Lecture 18: Lec 17: Regenerative Steam Power Cycle with Closed Feed-Water Heater, Ideal Working Fluid

Lecture 19: Lec 18: Multi-fluid Cycle and Analysis

Lecture 20: Lec 19: Analysis of Multi-fluid Cycle; Second Law Analysis of Steam Power Cycle

Lecture 21: Lec 20: Problems of Steam Power Cycle

Lecture 22: Lec 21: Problems of Steam Power Cycle - Cont.

Lecture 23: Lec: 22: Types of Boiler, Different Cycles in Boiler Operation, Boiler attachment

Lecture 24: Lec: 23: Cochran Boiler Operation, Boiler attachment

Lecture 25: Lec: 24: Boiler Attachments

Lecture 26: Lec: 25: Superheaters and their Arrangements, Steam Temperature Control

Lecture 27: Lec: 26: Characteristics of Convective and Radiant Superheaters; Steam Temperature Control

Lecture 28: Lec: 27: Problems on Boiler/Steam Generator

Lecture 29: Lec 28: Use of nozzles in steam power plant, flow analysis of steam in nozzle

Lecture 30: Lec 29: Flow analysis of steam in nozzle: Mass flow rate

Lecture 31: Lec 30: Mass flow rate of steam in nozzle, Critical Pressure Ratio

Lecture 32: Lec 31: Critical Pressure Ratio and its Physical Significance

Lecture 33: Lec 32: Nozzle efficiency and factors that affect the efficiency

Lecture 34: Lec 33: Factors that affect the efficiency, problem on flow nozzle

Lecture 35: Lec 34: Problem on flow nozzle

Lecture 36: Lec 35: Steam Turbines: types and analysis using velocity triangles

Lecture 37: Lec 36: Analysis of Impulse Steam Turbine

Lecture 38: Lec 37: Compounding of Steam Turbine

Lecture 39: Lec 38: Analysis of Reaction Steam Turbine

Lecture 40: Lec 39: Problems on Steam Turbine

Lecture 41: Lec 40: The Role of Condenser in Power Plant

Lecture 42: Lec 41: Cooling Tower: Types and Analysis

Lecture 43: Lec 42: Cooling Tower Performance

Lecture 44: Lec 43: IC Engines, Classification, Different Parts, SI and CI Engines

Lecture 45: Lec 44: Comparison of 2-stroke and 4-stroke Engines

Lecture 46: Lec 45: Comparison of SI and CI Engines, Compression Ratio

Lecture 47: Lec 46: Introduction to Carburettor and Regimes of Engine Operation

Lecture 48: Lec 47: Regimes of Engine Operation and Simple Float Type Carburettor

Lecture 49: Week 48: Simple Float Type Carburettor and its Analysis

Lecture 50: Week 49: Mass Flow Rate of Fuel and limitations of Simple Float Type Carburettor

Lecture 51: Week 50: Limitations of Simple Float Type Carburettor, Problem on Carburettion

Lecture 52: Week 51: Engine Operating Characteristics: MEP and Indicator diagram

Lecture 53: Week 52: Performance Analysis parameters of IC Engine

Lecture 54: Week 53: Fuel of IC Engines

Lecture 55: Week 54: Alternative Fuels and Self Ignition Characteristics of Fuel: Octane Numner, Cetane Number

Lecture 56: Lec 55: Thermodynamic Analysis of SI Engine

Lecture 57: Lec 56: Thermodynamic Analysis of CI Engine

Lecture 58: Lec 57: Numerical Problems on Engine Performance

Lecture 59: Lec 58: Pressure-Crank angle diagram, Engine Efficiencies

Lecture 60: Lec 59: Numerical Problems on SI and CI Engines

Lecture 61: Lec 60: Vapour Compression Refrigeration Cycle and its analysis

Lecture 62: Lec 61: Problems on Vapour Compression Refrigeration Cycle

Lecture 63: Lec 62: Gas Turbine Units and Thermodynamic Cycles

Lecture 64: Lec 63: Gas Compressor and Optimum Pressure Ratio

Lecture 65: Lec 64: Compressor Efficiency and Multistage Compression with Intercooling

Lecture 66: Lec 65: Gas Turbine Unit: Combined Cycle

Lecture 67: Lec 66: Problems On Gas Turbine Cycle